A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
1. Measured on Mini-Circuits Characterization Test Board TB-EQY-6-24+. See Characterization Test Circuit (Fig. 1)
model family designation
index over pad 1
Electrical Specifications1 at 25°C, 50Ω, unless otherwise noted.
5 - 10
10 - 18
18 - 20
Fig 1. Block Diagram of Test Circuit used for characterization. Test Board TB-EQY-6-24+
Conditions: Attenuation & Return Loss Pin=0 dBm
Characterization Test Circuit
Marking may contain other features or characters for internal lot control
Operating Case Temperature
-55°C to 105°C
-65°C to 150°C
RF Input Power3
Absolute Maximum Ratings2
2. Permanent damage may occur if any of these limits are exceeded.