A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
Low Pass Filter
Outline Dimensions (
Page 3 of 3
Demo Board MCL P/N: TB-799+
Suggested PCB Layout (PL-429)
98-GE Rev.: Q (03/30/18) M167078 File: 98-GE.docx
Sheet 4 of 14
This document and its contents are the property of Mini-Circuits.
Dimensions are in inches (mm). Tolerances: 2Pl. + .01; 3 Pl. + .005
1. Open style, ceramic base.
2. Termination finish:
For RoHS Case Styles:
Tin plate over Nickel plate. All models, (+) suffix.
For RoHS-5 Case Styles: Tin-Lead plate over Nickel plate. All models, no (+) suffix.
3. Pad tolerance to be non-cumulative. Minimum spacing between each pad is .004 (0.1).