Key features
• High and stable operating voltage
• Low self-discharge rate
(less than 1% after 1 year of
storage at + 20°C)
• Stainless steel container and
end caps (low magnetic
signature) for LS 14250
• Hermetic glass-to-metal sealing
• Non-flammable electrolyte
• Compliant with IEC 86-4
safety standard and EN 50020
intrinsic safety standard
• Underwriters Laboratories (UL)
Component Recognition
- LS 14250 File Number MH 12609
- LST 14250 File Number MH 12802
• Non-restricted for transport
Main applications
• Utility metering
• Automatic meter reading
• Alarms and security devices
• Tollgate systems
• Memory back-up
• Computer real-time clocks
• Tracking systems
• Automotive electronics
• Professional electronics
etc...
Electrical characteristics
(typical values relative to cells stored for one year or less at + 30°C max.)
Nominal capacity
1.10 Ah
(at 1.5 mA + 20°C 2.0 V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off).
Open circuit voltage
(at + 20°C)
3.67V
Nominal voltage
(at 0.1 mA + 20°C)
3.6V
Pulse capability : Typically up to 100 mA (100 mA/0.1 second pulses,
drained every 2 mn at + 20°C from undischarged cells with 10 µA base
current, yield voltage readings above 3.0 V. The readings may vary according
to the pulse characteristics, the temperature, and the cell's previous history.
Fitting the cell with a capacitor may be recommended in severe conditions.
Consult Saft)
Continuous current permitting 50% of the nominal capacity
to be achieved at + 20°C with 2.0 V cut off.
40 mA
(Higher currents possible, consult Saft)
Storage
(recommended)
+ 30°C (+ 86°F) max
(for more severe conditions, consult Saft)
Operating temperature range
- 60°C/+ 85°C
(Operation above ambient T may lead to reduced capacity and
(- 76°F/+ 185°F)
lower voltage readings at the beginning of pulses. Consult Saft)
Physical characteristics
LS 14250
LST 14250
Diameter (max)
14.65 mm (0.58 in)
14.4 mm (0.57 in)
Height (max)
24.8 mm (0.98 in)
25.1 mm (0.99 in)
Typical weight
8.9 g (0.3 oz)
9.4 g (0.3 oz)
Li metal content
approx. 0.3 g
approx. 0.3 g
Available termination suffix
CN, CNR
radial tabs
2 PF, 3 PF, 3 PF RP, 4 PF
radial pins
CNA (AX)
axial leads
FL
flying leads ...etc.
September 2004
Cell size references
1⁄2 UM3 - 1⁄2 R6 - 1⁄2 AA
Primary lithium batteries
LS 14250
LST 14250
For applications requesting good
voltage response and operating life
in - 60°C/+ 85°C environments.
3.6V Primary lithium-thionyl chloride (Li-SOCl2)
High energy density
1
⁄2 AA-size bobbin cells