Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the

Cree logo are registered trademarks of Cree, Inc.

2

CLD-CT69.000

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

Fax: +1.919.313.5778

www.cree.com/ledlamps

Standard Bins for LM-EBL--N2 (I

Lamps are sorted to luminous intensity (I

Orders for LM1-EBL1-11-N2 may be filled with any or all bins contained as below.

All luminous intensity (I

W or

above

V

U

T

S

Important Notes:

All ranks will be included per delivery; rank ratio will be based on the dice distribution.

Tolerance of measurement of luminous intensity is ±10%.

Tolerance of measurement of the dominant wavelength is ±1 nm.

Tolerance of measurement of V

Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-

ment.

Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.

Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED

product safely.

Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the

interior of the device, which can be damaged by excessive force to the SMD surface.

1.

2.

3.

4.

5.

6.

7.

8.

480 nm

460 nm

Dominant Wavelength (λ

1120 mcd

710 mcd

450 mcd

280 mcd

180 mcd