TC211

192-

× 165-PIXEL CCD IMAGE SENSOR

SOCS008B – JANUARY 1990

2-7

POST OFFICE BOX 655303

PARAMETER

MIN

TYP

MAX

UNIT

Sensitivity (see Note 9)

No IR filter

Measured at VU (see Note 10)

260

mV/lx

Sensitivity (see Note 9)

With IR filter

Measured at VU (see Note 10)

33

mV/lx

Saturation signal (see Note 11)

Antiblooming disabled

400

600

mV

Saturation signal (see Note 11)

Antiblooming enabled

350

450

mV

Blooming overload ratio (see Note 12)

Strobe

5

Blooming overload ratio (see Note 12)

Shuttered light

100

Output signal nonuniformity (1/2 saturation) (see Note 13)

10%

20%

Image-area well capacity

150

×103

electrons

Dark current

TA = 21°C

0.027

nA/cm2

Dark signal (see Note 14)

10

15

mV

Dark signal nonuniformity for entire field (see Note 15)

4

15

mV

Modulation transfer function

Horizontal

50%

Modulation transfer function

Vertical

70%

NOTES:

9. Sensitivity is measured at an integration time of 16.667 ms and a source temperature of 2856 K. A CM-500 filter is used.

10. VU is the output voltage that represents the threshold of operation of antiblooming. VU ≈ 1/2 saturation signal.

11. Saturation is the condition in which further increase in exposure does not lead to further increase in output signal.

12. Blooming overload ratio is the ratio of blooming exposure to saturation exposure.

13. Output signal nonuniformity is the ratio of the maximum pixel-to-pixel difference in output signal to the mean output signal for

exposure adjusted to give 1/2 the saturation output signal.

14. Dark-signal level is measured from the dummy pixels.

15. Dark-signal nonuniformity is the maximum pixel-to-pixel difference in a dark condition.

PARAMETER MEASUREMENT INFORMATION

100%

90%

10%

0%

tr

tf

VIH min

VIL max

Intermediate Level

tr = 220 ns, tf = 330 ns for IAG

tr = 115 ns, tf = 135 ns for ABG

Figure 3. Typical Clock Waveform for IAG and ABG