Os motores de busca de Datasheet de Componentes eletrônicos |
|
MMSF7P03HDR2G Folha de dados(PDF) 6 Page - ON Semiconductor |
|
MMSF7P03HDR2G Folha de dados(HTML) 6 Page - ON Semiconductor |
6 / 8 page MMSF7P03HD http://onsemi.com 6 SAFE OPERATING AREA The Forward Biased Safe Operating Area curve (Figure 12) defines the maximum simultaneous drain−to−source voltage and drain current that a transistor can handle safely when it is forward biased. Curves are based upon maximum peak junction temperature and a case temperature (TC) of 25 °C. Peak repetitive pulsed power limits are determined by using the thermal response data in conjunction with the procedures discussed in AN569, “Transient Thermal Resistance − General Data and Its Use.” Switching between the off−state and the on−state may traverse any load line provided neither rated peak current (IDM) nor rated voltage (VDSS) is exceeded, and that the transition time (tr, tf) does not exceed 10 ms. In addition the total power averaged over a complete switching cycle must not exceed (TJ(MAX) − TC)/(RqJC). A power MOSFET designated E−FET can be safely used in switching circuits with unclamped inductive loads. For reliable operation, the stored energy from circuit inductance dissipated in the transistor while in avalanche must be less than the rated limit and must be adjusted for operating conditions differing from those specified. Although industry practice is to rate in terms of energy, avalanche energy capability is not a constant. The energy rating decreases non−linearly with an increase of peak current in avalanche and peak junction temperature. Although many E−FETs can withstand the stress of drain−to−source avalanche at currents up to rated pulsed current (IDM), the energy rating is specified at rated continuous current (ID), in accordance with industry custom. The energy rating must be derated for temperature as shown in the accompanying graph (Figure 13). Maximum energy at currents below rated continuous ID can safely be assumed to equal the values indicated. Figure 12. Maximum Rated Forward Biased Safe Operating Area 0.1 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 1.0 10 RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT VGS = 12 V SINGLE PULSE TA = 25°C 10 0.0 1 dc 10 ms 1.0 100 100 1 ms TJ, STARTING JUNCTION TEMPERATURE (°C) 0 25 45 65 85 105 3000 145 2000 500 4000 Figure 13. Maximum Avalanche Energy versus Starting Junction Temperature 5000 0.1 125 2500 1500 3500 4500 1000 ID = 7.0 A |
Nº de peça semelhante - MMSF7P03HDR2G |
|
Descrição semelhante - MMSF7P03HDR2G |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |