Os motores de busca de Datasheet de Componentes eletrônicos |
|
MC33982CHFK Folha de dados(PDF) 10 Page - Freescale Semiconductor, Inc |
|
MC33982CHFK Folha de dados(HTML) 10 Page - Freescale Semiconductor, Inc |
10 / 36 page Analog Integrated Circuit Device Data 10 Freescale Semiconductor 33982 ELECTRICAL CHARACTERISTICS STATIC ELECTRICAL CHARACTERISTICS POWER OUTPUT (CONTINUED) Output Negative Clamp Voltage 0.5 A < IHS < 2.0 A, Output OFF VCL -20 – -15 V Over-temperature Shutdown(13) TSD 160 175 190 °C Over-temperature Shutdown Hysteresis(13) TSD(HYS) 5.0 – 20 °C CONTROL INTERFACE Input Logic High-voltage(14) VIH 0.7 x VDD – – V Input Logic Low-voltage(14) VIL – – 0.2 x VDD V Input Logic Voltage Hysteresis(15) VIN(HYS) 100 600 1200 mV Input Logic Pull-down Current (SCLK, IN, SI) IDWN 5.0 – 20 μA RST Input Voltage Range VRST 4.5 5.0 5.5 V SO, FS Tri-state Capacitance(16) CSO – – 20 pF Input Logic Pull-down Resistor (RST) and WAKE RDWN 100 200 400 k Ω Input Capacitance(16) CIN – 4.0 12 pF WAKE Input Clamp Voltage(17) ICL(WAKE) < 2.5 mA VCL(WAKE) 7.0 – 14 V WAKE Input Forward Voltage ICL(WAKE) = -2.5 mA VF(WAKE) -2.0 – -0.3 V SO High-state Output Voltage IOH = 1.0 mA VSOH 0.8 x VDD – – V FS, SO Low-state Output Voltage IOL = -1.6 mA VSOL – 0.2 0.4 V SO Tri-state Leakage Current CS > 0.7 x VDD ISO(LEAK) -5.0 0.0 5.0 μA Input Logic Pull-up Current (18) CS, VIN > 0.7 x VDD IUP 5.0 – 20 μA FSI Input Pin External Pull-down Resistance FSI Disabled, HS Indeterminate FSI Enabled, HS OFF FSI Enabled, HS ON RFS RFSDIS RFSOFF RFSON – 6.0 30 0.0 10 – 1.0 14 – k Ω Notes 13. Guaranteed by process monitoring. Not production tested. 14. Upper and lower logic threshold voltage range applies to SI, CS, SCLK, RST, IN, and WAKE input signals. The WAKE and RST signals may be supplied by a derived voltage reference to VPWR. 15. No hysteresis on FSI and wake pins. Parameter is guaranteed by process monitoring but is not production tested. 16. Input capacitance of SI, CS, SCLK, RST, and WAKE. This parameter is guaranteed by process monitoring but is not production tested. 17. The current must be limited by a series resistance when using voltages > 7.0 V. 18. Pull-up current is with CS OPEN. CS has an active internal pull-up to VDD. Table 4. Static Electrical Characteristics (continued) Characteristics noted under conditions 4.5 V ≤ V DD ≤ 5.5 V, 6.0 V ≤ VPWR ≤ 27 V, -40°C ≤ TA ≤ 125°C, unless otherwise noted. Typical values noted reflect the approximate parameter mean at TA = 25°C under nominal conditions, unless otherwise noted. Characteristic Symbol Min Typ Max Unit |
Nº de peça semelhante - MC33982CHFK |
|
Descrição semelhante - MC33982CHFK |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |