Data brief

For further information contact your local STMicroelectronics sales office.

March 2011

Doc ID 018524 Rev 1

1/5

5

STEVAL-MKI080V1

MEMS demonstration board based on the LPR410AL

analog output 2-axis gyroscope

Features

– analog (AWM)

– digital (DWM)

Description

The STEVAL-MKI080V1 demonstration board is

designed to provide the user with a complete,

ready-to-use platform for demonstration of the

LPR410AL product family.

The STEVAL-MKI080V1 includes a sensing

element and an IC interface capable of translating

information from the sensing element into a

measured signal that can be used for external

applications.

In addition to the MEMS sensor, the

demonstration board uses an ST7 microcontroller

which functions as a bridge between the sensor

and the PC. This makes it possible to download

the graphical user interface (GUI) from the

website or to use dedicated software routines for

customized applications.

The STEVAL-MKI080V1 demonstration board has

been designed for use in two different working

modes: analog and digital.

In analog mode (AWM) the microcontroller is

disabled and the analog outputs of the device are

available to the user on a dedicated connector.

This is the default working mode when power is

supplied through either the USB connector or the

supply connector.

In digital mode (DWM) the microcontroller is

enabled and allows the user to digitally acquire

the output signals of the device, to view them on

the PC through the dedicated GUI, and to

manage the control pins of the device.

STEVAL-MKI080V1

www.st.com