Os motores de busca de Datasheet de Componentes eletrônicos |
|
AD1953 Folha de dados(PDF) 9 Page - Analog Devices |
|
AD1953 Folha de dados(HTML) 9 Page - Analog Devices |
9 / 36 page REV. 0 AD1953 –9– PRODUCT OVERVIEW (continued from page 1) An extensive SPI port allows click-free parameter updates, along with readback capability from any point in the algorithm flow. The AD1953 also includes ADI’s patented multibit Σ-∆ DAC architecture. This architecture provides 112 dB SNR and dynamic range and THD+N of –100 dB. These specifications allow the AD1953 to be used in applications ranging from low end boom-boxes to high end professional mixing/editing systems. The AD1953 has a digital output that allows it to be used purely as a DSP. This digital output can also be used to drive an exter- nal DAC to extend the number of channels beyond the three that are provided on the chip. This chip can be used with either its default signal processing program or with a custom user- designed program. Graphical programming tools are available from ADI for custom programming. Features The AD1953 is comprised of a 26-bit DSP (48-bit with double- precision) for interpolation and audio processing, three multibit Σ-∆ modulators, and analog output drive circuitry. Other features include an on-chip parameter RAM using a “safe-upload” feature for transparent and simultaneous updates of filter coefficients. Digital de-emphasis filters are also included. On-chip input selectors allow up to three sources of serial data and master clock to be selected. The 3-channel configuration is especially useful for 2.1 playback systems that include two satellite speakers and a subwoofer. The default program allows for independent equalization and compression/limiting for the satellite and subwoofer outputs. Figure 1 shows the block diagram of the device. The AD1953 contains a program RAM that is booted from an internal program ROM on power-up. Signal-processing param- eters are stored in a 256-location parameter RAM, which is initialized on power-up by an internal boot ROM. New values are written to the parameter RAM using the SPI port. The values stored in the parameter RAM control the IIR equalization filters, the dual-band compressor/limiter, the delay values, and the settings of the stereo spreading algorithm. The AD1953 has a very sophisticated SPI port that supports complete read/write capability of both the program RAM and the parameter RAM. Two control registers are also provided to control the chip serial modes and various other optional fea- tures. Handshaking is included for ease of memory uploads/ downloads. The AD1953 contains eight independent data-capture circuits that can be programmed to tap the signal flow of the processor at any point in the DSP algorithm flow. Two of these data- capture circuits can be read back over the SPI port, and the other six are fed to a serial output pin operating either in TDM mode (for all six channels) or 2-channel mode for simple con- nection to an external DAC. This allows the basic functionality of the AD1953 to be easily extended. The processor core in the AD1953 has been designed from the ground up for straightforward coding of sophisticated compres- sion/limiting algorithms. The AD1953 contains two independent compressor/limiters with rms based amplitude detection and attack/hold/release controls, together with an arbitrary compres- sion curve that is loaded by the user into a lookup table that resides in the parameter RAM. The compressor also features look-ahead compression, which prevents compressor overshoots. The AD1953 has a very flexible serial data input port that allows for glueless interconnection to a variety of ADCs, DSP chips, AES/EBU receivers, and sample rate converters. The AD1953 can be configured in left-justified, I 2S, right-justified, or DSP serial port compatible modes. It can support 16, 20, and 24 bits in all modes. The AD1953 accepts serial audio data in MSB first, twos complement format. The part can also be set up in a 4-channel serial input mode by simultaneously using the serial input mux and the auxiliary serial input. The AD1953 operates from a single 5 V power supply. It is fabricated on a single monolithic integrated circuit and is housed in a 48-lead LQFP package for operation over the temperature range –40 °C to +105°C. 3:1 AUDIO DATA MUX1 3 3 SPI PORT 3:1 MCLK MUX1 MCLK GENERATOR1 (256/512 fS IN) 256/512 fS OUT DAC – L COEFFICIENT ROM 64 22 26 22 DSP CORE DATA FORMAT: 3.23 (SINGLE PRECISION) 3.45 (DOUBLE PRECISION) 3 3 ANALOG OUTPUTS MASTER CLOCK I/O GROUP DCSOUT SPI I/O GROUP 3 SERIAL IN1 DATA MEMORY, 512 26 CONTROL REGISTERS TRAP REG. (I2S, SPI) SAFELOAD REGISTERS PROGRAM RAM 512 35 PARAMETER RAM 256 22 MEMORY CONTROLLERS DAC – R DAC –SW2 BIAS ANALOG BIAS RESETB MUTE DE-EMPHASIS ZEROFLAG NOTES 1CONTROLLED THROUGH SPI CONTROL REGISTERS 2DAC DOES NOT USE DIGITAL INTERPOLATION SERIAL DATA I/O GROUP DCSOUT TRAP AUX SERIAL DATA INPUT (2-CHANNEL AND TDM) FILTCAP AGND 3 DGND 2 VOLTAGE REFERENCE VREF DVDD AVDD ODVDD 3 Figure 1. Block Diagram |
Nº de peça semelhante - AD1953 |
|
Descrição semelhante - AD1953 |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |