Application Information

TS4994

25/31

The maximum die temperature allowable for the TS4994 is 125°C. However, in case of overheating, a

thermal shutdown set to 150°C, puts the TS4994 in standby until the temperature of the die is reduced by

about 5°C.

Example: Vcc=5V, RL=8

With

4.7 Decoupling of the circuit

performances to those shown in the datasheet.

supply rail are less filtered.

(with input grounded and in the lower frequency region).

TS4994 gain is close to zero. After the wake-up time period, the gain is released and set to its nominal

value.

up time value.

4.9 Shutdown time

When the standby command is set, the time required to put the two output stages in high impedance and

the internal circuitry in shutdown mode is a few microseconds.

Note:

In shutdown mode, Bypass pin and Vin+, Vin- pins are short-circuited to ground by internal switches. This allows

)

C

(

P

RTH

C

125

T

diss

JA

AMB

°

×

−

°

=