Os motores de busca de Datasheet de Componentes eletrônicos |
|
HCPL-2601S Folha de dados(PDF) 4 Page - Fairchild Semiconductor |
|
HCPL-2601S Folha de dados(HTML) 4 Page - Fairchild Semiconductor |
4 / 12 page 4 www.fairchildsemi.com Single-channel: 6N137, HCPL-2601, HCPL-2611 Dual-Channel: HCPL-2630, HCPL-2631 Rev. 1.0.3 Transfer Characteristics (TA = -40 to +85°C Unless otherwise specified) Isolation Characteristics (TA = -40°C to +85°C Unless otherwise specified.) ** All Typicals at VCC = 5V, TA = 25°C NOTES 1. The VCC supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible to the package VCC and GND pins of each device. 2. Each channel. 3. Enable Input - No pull up resistor required as the device has an internal pull up resistor. 4. tPLH -Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 5. tPHL -Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 6. tr -Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse. 7. tf -Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse. 8. tELH -Enable input propagation delay is measured from the 1.5 V level on the HIGH to LOW transition of the input voltage pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse. 9. tEHL -Enable input propagation delay is measured from the 1.5 V level on the LOW to HIGH transition of the input voltage pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse. 10. CMH -The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., VOUT > 2.0 V). Measured in volts per microsecond (V/µs). 11. CML -The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e., VOUT < 0.8 V). Measured in volts per microsecond (V/µs). 12. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together. DC Characteristics Test Conditions Symbol Min Typ** Max Unit High Level Output Current (VCC = 5.5 V, VO = 5.5 V) (IF = 250 µA, VE = 2.0 V) (Note 2) IOH 100 µA Low Level Output Current (VCC = 5.5 V, IF = 5 mA) (VE = 2.0 V, ICL = 13 mA) (Note 2) VOL .35 0.6 V Input Threshold Current (VCC = 5.5 V, VO = 0.6 V, VE = 2.0 V, IOL = 13 mA) IFT 3 5 mA Characteristics Test Conditions Symbol Min Typ** Max Unit Input-Output Insulation Leakage Current (Relative humidity = 45%) (TA = 25°C, t = 5 s) (VI-O = 3000 VDC) (Note 12) II-O 1.0* µA Withstand Insulation Test Voltage (RH < 50%, TA = 25°C) (Note 12) ( t = 1 min.) VISO 2500 VRMS Resistance (Input to Output) (VI-O = 500 V) (Note 12) RI-O 1012 Ω Capacitance (Input to Output) (f = 1 MHz) (Note 12) CI-O 0.6 pF |
Nº de peça semelhante - HCPL-2601S |
|
Descrição semelhante - HCPL-2601S |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |