OP140C datasheet(1/2 Pages) OPTEK

Nome de Peças	OP140C

Descrição Electrónicos	GaAs Plastic Infrared Emitting Diodes

Download	2 Pages

Scroll/Zoom	100%

Fabricante Electrônico	OPTEK [OPTEK Technologies]

Página de início	http://www.optekinc.com

Logo

1 / 2 page

Features

•Wide irradiance pattern

•Selected to specific on-line intensity

ranges

•Low cost, miniature plastic side-

looking package

•Mechanically and spectrally matched

to the OP550 series of

phototransistors and the OP560 series

of photodarlingtons

Description

The OP140 series devices are 935nm

high intensity gallium arsenide infrared

emitting diodes molded in IR

transmissive plastic side-looking

packages. The side looking packages

are for use in PC board mounted slotted

switches or as an easy mount PC board

interrupter.

Replaces

OP140SL series

Absolute Maximum Ratings (TA = 25

o C unless otherwise noted)

Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V

Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA

Peak Forward Current (1

µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A

Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40

o C to +100o C

Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering

iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260

o C(1)

Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW

(2)

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.

A max. of 20 grams force may be applied to the leads when soldering.

(2) Derate linearly 1.33 mW/

o C above 25o C.

(3) Ee(APT) is a measurement of the average apertured radiant incidence upon a sensing area

0.180" (4.57 mm) in diameter perpendicular to and centered on the mechanical axis of the

lens and 0.653" (16.6 mm) from the lens tip. Ee(APT) is not necessarily uniform within the

measured area.

Product Bulletin OP140A

May 1996

GaAs Plastic Infrared Emitting Diodes

Types OP140A, OP140B, OP140C, OP140D

2-10

Nº de peça semelhante - OP140C

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
OPTEK Technologies	OP140C	364Kb / 5P	Plastic Infrared Emitting Diode
TT Electronics.	OP140C	845Kb / 5P	Plastic Infrared Emitting Diode

More results

Descrição semelhante - OP140C

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
OPTEK Technologies	OP1613LD	85Kb / 2P	GaAs Plastic Infrared Emitting Diodes
	OP166A	383Kb / 2P	GaAs Plastic Infrared Emitting Diodes
	OP168FA	257Kb / 2P	GaAs Plastic Infrared Emitting Diodes
	OP169A	377Kb / 2P	GaAs Plastic Infrared Emitting Diodes
	OP160SL	85Kb / 2P	GAAS PLASTIC INFRARED EMITTING DIODES
	OP169SL	90Kb / 2P	GaAs PLASTIC INFRARED EMITTING DIODES
	OP165A	1Mb / 2P	GaAs Plastic Infrared Emitting Diodes
	OP145A	365Kb / 2P	GaAs Plastic Infrared Emitting Diodes
KODENSHI_AUK CORP.	EL6F11	205Kb / 2P	Infrared Emitting Diodes(GaAs)
PerkinElmer Optoelectro...	VTE3322LA	22Kb / 1P	GaAs Infrared Emitting Diodes

More results

OP140C Folha de dados(PDF) 1 Page - OPTEK Technologies

OP140C Folha de dados(HTML) 1 Page - OPTEK Technologies

Nº de peça semelhante - OP140C

Descrição semelhante - OP140C

Html Pages

1 2

Folha de dados Download

Ligação URL