PD070-HL2

Rev 1.0

2

Table 2: Absolute Maximum Ratings

PARAMETER

MIN

MAX

UNIT

Forward Current

-

5

mA

Reverse Current

-

250

μA

Reverse Voltage

-

30

V

Optical input power

-

5

mW

Operating Case Temperature

-40

+85

ºC

Storage Temperature

-40

+85

ºC

Soldering temperature (10 seconds)

-

+250

ºC

Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied

under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.

PIN LOCATIONS – Standard

ORDERING INFORMATION

Table 3: Standard

Part Number

Options

PD070-HL2-300

SC/APC pigtail, 1 meter SMF-28 fiber, 3 pin

PD070-HL2-520

SC/APC receptacle, 3 pin

Table 4: Custom

Part Number

Options

PD070-HL2-3xx

Number of pins: 2, 3

Fiber length: 0.5 meter, 1.0 meter

Fiber type: Single mode (SMF-28) or custom supplied

Connector Type: SC, ST or FC. APC or UPC

PD070-HL2-5xx

Number of pins: 2, 3

Connector Type: SC, ST or FC. Aligned for APC or UPC

Please contact Anadigics for the specific part number and pinout that suits your needs

ANADIGICS, Inc.

829 Flynn Road

Camarillo, California 93012, U.S.A.

Tel: +1 (805) 445-4500

Fax: +1 (805) 445-4502

E-mail: Mktg@anadigics.com

IMPORTANT NOTICE

ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any

time without notice. The product specifications contained in Advanced Product Information sheets and

Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in

Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS

assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the

information they are using is current before placing orders.

WARNING

ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of

an ANADIGICS product in any such application without written consent is prohibited.