Os motores de busca de Datasheet de Componentes eletrônicos |
|
ATMEGA8535-16AC Folha de dados(PDF) 29 Page - ATMEL Corporation |
|
ATMEGA8535-16AC Folha de dados(HTML) 29 Page - ATMEL Corporation |
29 / 321 page 29 ATmega8535(L) 2502K–AVR–10/06 When this Oscillator is selected, start-up times are determined by the SUT fuses as shown in Table 8. Note: 1. This option should not be used when operating close to the maximum frequency of the device. Calibrated Internal RC Oscillator The calibrated internal RC Oscillator provides a fixed 1.0, 2.0, 4.0, or 8.0 MHz clock. All frequencies are nominal values at 5V and 25 °C. This clock may be selected as the sys- tem clock by programming the CKSEL Fuses as shown in Table 9. If selected, it will operate with no external components. The CKOPT Fuse should always be unpro- grammed when using this clock option. During Reset, hardware loads the calibration byte into the OSCCAL Register and thereby automatically calibrates the RC Oscillator. At 5V, 25 °C and 1.0 MHz Oscillator frequency selected, this calibration gives a fre- quency within ± 3% of the nominal frequency. Using run-time calibration methods as described in application notes available at www.atmel.com/avr it is possible to achieve ±1% accuracy at any given V CC and Temperature. When this Oscillator is used as the chip clock, the Watchdog Oscillator will still be used for the Watchdog Timer and for the Reset Time-out. For more information on the pre-programmed calibration value, see the section “Calibration Byte” on page 239. Note: 1. The device is shipped with this option selected. When this Oscillator is selected, start-up times are determined by the SUT Fuses as shown in Table 10. XTAL1 and XTAL2 should be left unconnected (NC). Table 7. External RC Oscillator Operating Modes CKSEL3..0 Frequency Range (MHz) 0101 0.1 - 0.9 0110 0.9 - 3.0 0111 3.0 - 8.0 1000 8.0 - 12.0 Table 8. Start-up Times for the External RC Oscillator Clock Selection SUT1..0 Start-up Time from Power-down and Power-save Additional Delay from Reset (VCC = 5.0V) Recommended Usage 00 18 CK – BOD enabled 01 18 CK 4.1 ms Fast rising power 10 18 CK 65 ms Slowly rising power 11 6 CK(1) 4.1 ms Fast rising power or BOD enabled Table 9. Internal Calibrated RC Oscillator Operating Modes CKSEL3..0 Nominal Frequency (MHz) 0001(1) 1.0 0010 2.0 0011 4.0 0100 8.0 |
Nº de peça semelhante - ATMEGA8535-16AC |
|
Descrição semelhante - ATMEGA8535-16AC |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |