Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

TDA7088T Folha de dados(PDF) 11 Page - NXP Semiconductors

Nome de Peças TDA7088T
Descrição Electrónicos  FM receiver circuit for battery supply
Download  16 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  PHILIPS [NXP Semiconductors]
Página de início  http://www.nxp.com
Logo PHILIPS - NXP Semiconductors

TDA7088T Folha de dados(HTML) 11 Page - NXP Semiconductors

Back Button TDA7088T Datasheet HTML 7Page - NXP Semiconductors TDA7088T Datasheet HTML 8Page - NXP Semiconductors TDA7088T Datasheet HTML 9Page - NXP Semiconductors TDA7088T Datasheet HTML 10Page - NXP Semiconductors TDA7088T Datasheet HTML 11Page - NXP Semiconductors TDA7088T Datasheet HTML 12Page - NXP Semiconductors TDA7088T Datasheet HTML 13Page - NXP Semiconductors TDA7088T Datasheet HTML 14Page - NXP Semiconductors TDA7088T Datasheet HTML 15Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 11 / 16 page
background image
1996 May 14
11
Philips Semiconductors
Product specification
FM receiver circuit for battery supply
TDA7088T
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our
“IC Package Databook” (order code 9398 652 90011).
Reflow soldering
Reflow soldering techniques are suitable for all SO
packages.
Reflow soldering requires solder paste (a suspension of
fine solder particles, flux and binding agent) to be applied
to the printed-circuit board by screen printing, stencilling or
pressure-syringe dispensing before package placement.
Several techniques exist for reflowing; for example,
thermal conduction by heated belt. Dwell times vary
between 50 and 300 seconds depending on heating
method. Typical reflow temperatures range from
215 to 250
°C.
Preheating is necessary to dry the paste and evaporate
the binding agent. Preheating duration: 45 minutes at
45
°C.
Wave soldering
Wave soldering techniques can be used for all SO
packages if the following conditions are observed:
• A double-wave (a turbulent wave with high upward
pressure followed by a smooth laminar wave) soldering
technique should be used.
• The longitudinal axis of the package footprint must be
parallel to the solder flow.
• The package footprint must incorporate solder thieves at
the downstream end.
During placement and before soldering, the package must
be fixed with a droplet of adhesive. The adhesive can be
applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the
adhesive is cured.
Maximum permissible solder temperature is 260
°C, and
maximum duration of package immersion in solder is
10 seconds, if cooled to less than 150
°C within
6 seconds. Typical dwell time is 4 seconds at 250
°C.
A mildly-activated flux will eliminate the need for removal
of corrosive residues in most applications.
Repairing soldered joints
Fix the component by first soldering two diagonally-
opposite end leads. Use only a low voltage soldering iron
(less than 24 V) applied to the flat part of the lead. Contact
time must be limited to 10 seconds at up to 300
°C. When
using a dedicated tool, all other leads can be soldered in
one operation within 2 to 5 seconds between
270 and 320
°C.


Nº de peça semelhante - TDA7088T

Fabricante ElectrônicoNome de PeçasFolha de dadosDescrição Electrónicos
logo
Unisonic Technologies
TDA7088 UTC-TDA7088 Datasheet
435Kb / 7P
   FM RECEIVER CIRCUIT FOR BATTERY SUPPLY
More results

Descrição semelhante - TDA7088T

Fabricante ElectrônicoNome de PeçasFolha de dadosDescrição Electrónicos
logo
Silan Microelectronics ...
SC1088 SILAN-SC1088 Datasheet
184Kb / 7P
   FM RECEIVER CIRCUIT FOR BATTERY SUPPLY
logo
List of Unclassifed Man...
D7088 ETC-D7088 Datasheet
167Kb / 8P
   FM receiver circuit for battery supply
logo
Wuxi Youda electronics ...
YD9088 YOUDA-YD9088 Datasheet
77Kb / 4P
   FM RECEIVER CIRCUIT FOR BATTERY SUPPLY
logo
Unisonic Technologies
UTCTDA7088 UTC-UTCTDA7088 Datasheet
435Kb / 7P
   FM RECEIVER CIRCUIT FOR BATTERY SUPPLY
logo
Silan Microelectronics ...
SA1088 SILAN-SA1088 Datasheet
377Kb / 7P
   FM RECEIVER CIRCUIT FOR BATTERY SUPPLY
logo
NTE Electronics
NTE788 NTE-NTE788 Datasheet
23Kb / 3P
   Integrated Circuit IF System for FM Receiver
logo
Panasonic Semiconductor
AN6162SC PANASONIC-AN6162SC Datasheet
213Kb / 5P
   Narrow Band FM Receiver Circuit
logo
NXP Semiconductors
TEA5592 PHILIPS-TEA5592 Datasheet
466Kb / 14P
   AM/FM radio receiver circuit?
October 1990
TEA5594 PHILIPS-TEA5594 Datasheet
108Kb / 17P
   AM/FM radio receiver circuit
March 1991
TEA5591A PHILIPS-TEA5591A Datasheet
144Kb / 14P
   AM/FM radio receiver circuit
February 1990
More results


Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16


Folha de dados Download

Go To PDF Page


Ligação URL




Privacy Policy
ALLDATASHEETPT.COM
ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com