Os motores de busca de Datasheet de Componentes eletrônicos |
|
74LVC1G66GW Folha de dados(PDF) 4 Page - NXP Semiconductors |
|
74LVC1G66GW Folha de dados(HTML) 4 Page - NXP Semiconductors |
4 / 22 page 74LVC1G66_6 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 06 — 27 August 2007 4 of 22 NXP Semiconductors 74LVC1G66 Bilateral switch 8. Limiting values [1] The minimum input voltage rating may be exceeded if the input current rating is observed. [2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed. [3] For TSSOP5 and SC-74A packages: above 87.5 °C the value of P tot derates linearly with 4.0 mW/K. For XSON6 packages: above 45 °C the value of P tot derates linearly with 2.4 mW/K. 9. Recommended operating conditions [1] To avoid sinking GND current from terminal Z when switch current flows in terminal Y, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Y. In this case, there is no limit for the voltage drop across the switch. [2] Applies to control signal levels. Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +6.5 V VI input voltage [1] −0.5 +6.5 V IIK input clamping current VI < −0.5 V or VI >VCC + 0.5 V −50 - mA ISK switch clamping current VI < −0.5 V or VI >VCC + 0.5 V - ±50 mA VSW switch voltage enable and disable mode [2] −0.5 VCC + 0.5 V ISW switch current VSW > −0.5 V or VSW <VCC + 0.5 V - ±50 mA ICC supply current - 100 mA IGND ground current −100 - mA Tstg storage temperature −65 +150 °C Ptot total power dissipation Tamb = −40 ° C to +125 °C [3] - 250 mW Table 6. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VCC supply voltage 1.65 - 5.5 V VI input voltage 0 - 5.5 V VSW switch voltage [1] 0- VCC V Tamb ambient temperature −40 - +125 °C ∆t/∆V input transition rise and fall rate VCC = 1.65 V to 2.7 V [2] - - 20 ns/V VCC = 2.7 V to 5.5 V [2] - - 10 ns/V |
Nº de peça semelhante - 74LVC1G66GW |
|
Descrição semelhante - 74LVC1G66GW |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |