Os motores de busca de Datasheet de Componentes eletrônicos |
|
TPA6120A2 Folha de dados(PDF) 2 Page - Texas Instruments |
|
|
TPA6120A2 Folha de dados(HTML) 2 Page - Texas Instruments |
2 / 26 page www.ti.com ABSOLUTE MAXIMUM RATINGS DISSIPATION RATING TABLE AVAILABLE OPTIONS RECOMMENDED OPERATING CONDITIONS TPA6120A2 SLOS431 – MARCH 2004 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage. over operating free-air temperature range (unless otherwise noted) (1) TPA6120A2 Supply voltage, VCC+ to VCC- 33 V Input voltage, VI (2) ± V CC Differential input voltage, VID 6 V Minimum load impedance 8 Ω Continuous total power dissipation See Dissipation Rating Table Operating free–air temperature range, TA - 40 °C to 85°C Operating junction temperature range, TJ (3) - 40 °C to 150°C Storage temperature range, Tstg - 40 °C to 125°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 235 °C (1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. (2) When the TPA6120A2 is powered down, the input source voltage must be kept below 600-mV peak. (3) The TPA6120A2 incorporates an exposed PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipating plane for proper power dissipation. Failure to do so may result in exceeding the maximum junction temperature that could permanently damage the device. See TI Technical Brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package. θ JA (1) θ JC TA = 25°C PACKAGE ( °C/W) ( °C/W) POWER RATING DWP 44.4 33.8 2.8 W (1) The PowerPAD must be soldered to a thermal land on the printed-circuit board. See the PowerPAD Thermally Enhanced Package application note (SLMA002) TA PACKAGE PART NUMBER SYMBOL -40 °C to 85°C DWP(1) TPA6120A2DWP 6120A2 (1) The DWP package is available taped and reeled. To order a taped and reeled part, add the suffix R to the part number (e.g., TPA6120A2DWPR). MIN MAX UNIT Split Supply ±5 ±15 Supply voltage, VCC+ and VCC- V Single Supply 10 30 Load impedance VCC = ±5 V or ±15 V 16 Ω Operating free–air temperature, TA -40 85 °C 2 |
Nº de peça semelhante - TPA6120A2 |
|
Descrição semelhante - TPA6120A2 |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |