Analog Integrated Circuit Device Data

Freescale Semiconductor

5

33298

ELECTRICAL CHARACTERISTICS

MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS

MAXIMUM RATINGS

Table 3. Maximum Ratings

All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or

permanent damage to the device.

Rating

Symbol

Value

Unit

Power Supply Voltage

Normal Operation (Steady-state)

Transient Conditions(1)

- 1.5 to 26.5

- 13 to 60

V

Logic Supply Voltage(2)

- 0.3 to 7.0

V

Input pin Voltage(3)

- 0.3 to 7.0

V

Output Clamp Voltage(4)

2.0mA

≤ I

50 to 75

V

Output Self-Limit Current

3.0 to 6.0

A

Continuous Per Output Current(5)

1.0

A

ESD Voltage(6)

Human Body Model(7)

Machine Model(7)

2000

200

V

Output Clamp Energy(8)

Repetitive:

Non-Repetitive:

100

30

2.0

0.5

mJ

mJ

J

J

Recommended Frequency of SPI Operation(9)

2.0

MHz

Storage Temperature

- 55 to 150

Peak Package Reflow Temperature During Reflow(10),(11)

Note 11.

°C

Notes

1.

Transient capability with external 100

Ω resistor in series with VP pin and supply.

2.

Exceeding these limits may cause a malfunction or permanent damage to the device.

3.

Exceeding the limits on SCLK, SI, CS, SFPD, or RST pins may cause permanent damage to the device.

4.

With output OFF.

5.

Continuous output current rating so long as maximum junction temperature is not exceeded. Operation at 125

6.

ESD data available upon request.

7.

8.

Maximum output clamp energy capability at 150

9.

Guaranteed and production tested for 2.0MHz SPI operation, but demonstrated to operate to 8.5MHz at 25

10.

Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may

cause malfunction or permanent damage to the device.

11.

Freescale’s Package Reflow capability meets Pb-free requirements for JEDEC standard J-STD-020C. For Peak Package Reflow

Temperature and Moisture Sensitivity Levels (MSL), Go to www.freescale.com, search by part number [e.g. remove prefixes/suffixes

and enter the core ID to view all orderable parts. (i.e. MC33xxxD enter 33xxx), and review parametrics.