SN74CBTLV3861

LOW-VOLTAGE 10-BIT FET BUS SWITCH

SCDS041D – DECEMBER 1997 – REVISED NOVEMBER 1999

2

POST OFFICE BOX 655303

logic diagram (positive logic)

A1

SW

B1

A10

OE

SW

B10

2

11

23

22

13

simplified schematic, each FET switch

A

(OE)

B

–0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous channel current

128 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

61

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DGV package

86

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DW package

46

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

88

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51.