Os motores de busca de Datasheet de Componentes eletrônicos |
|
TC281 Folha de dados(PDF) 10 Page - Texas Instruments |
|
TC281 Folha de dados(HTML) 10 Page - Texas Instruments |
10 / 18 page TC281 1036- × 1010-PIXEL CCD IMAGE SENSOR SOCS058B – JUNE 1996 – REVISED MAY 1999 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended ranges of supply voltage and operating free-air temperature PARAMETER MIN TYP MAX UNIT Dynamic range (see Note 2) 62 dB Charge-conversion factor 10 µV/e Charge-transfer efficiency (see Note 3) 0.99990 0.99995 1 Signal-response delay time, Tau (see Note 4) 7 ns Output resistance 310 400 Ω Noise-equivalent signal 12 25 electrons Supply current (see Note 5) IDD 3.5 5 mA IAG 14500 SAG 14500 Capacitance SRG 52 pF TRG 50 RST 5.5 † All typical values are used at TA = 25°C. NOTES: 2. Dynamic range is – 20 times the logarithm of the mean-noise signal divided by the saturation-output signal. 3. Charge-transfer efficiency is one minus the charge loss per transfer in the output register. The test is performed in the dark using an electrical input signal. 4. Signal-response delay time is the time between the falling edge of the SRG pulse and the output-signal valid state. 5. VADC at 12 V and VSUBSTRATE at ground. optical characteristics PARAMETER MIN TYP MAX UNIT Sensitivity (see Note 6) No IR filter 240 mV/lux Sensitivity (see Note 6) With IR filter 30 mV/lux Saturation signal, Vsat (see Note 7) Antiblooming off 320 mV Blooming overload ratio (see Note 8) 300 1000 Image-area well capacity 32K electrons Smear at 5 MHz (see Notes 9 and 10) 0.06% Dark current TA = 21°C 0.4 nA/cm2 Electronic-shutter capability 1/1000 1/30 Saturation sec NOTES: 6. Based on 16.67 ms integration time. 7. Saturation is the condition in which further increases in exposure do not lead to further increase in output signal. 8. Blooming-overload ratio is the ratio of blooming exposure to saturation exposure. 9. Smear is a measure of the error introduced by transferring charge through an illuminated pixel in shutterless operation. It is equivalent to the ratio of the single-pixel transfer time to the exposure time using an illuminated section that is 1/10 of the image-area vertical height with recommended clock frequencies. 10. The exposure time is 16.67 ms, the fast dump clocking rate during vertical timing is 10 MHz, and the illuminated section is 1/10 of the height of the image section. |
Nº de peça semelhante - TC281 |
|
Descrição semelhante - TC281 |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |