TLC225xEP, TLC225xAEP

Advanced LinCMOS RAILTORAIL

VERY LOW POWER OPERATIONAL AMPLIFIERS

SGLS216 − NOVEMBER 2003

1

POST OFFICE BOX 655303

− One Assembly/Test Site, One Fabrication

Site

−40

°C to 125°C

Sources (DMS) Support

MIL-STD-883, Method 3015; Exceeds 150 V

(TLC2252/52A) and 100 V (TLC2254/54A)

Using Machine Model (C = 200 pF, R = 0)

† Component qualification in accordance with JEDEC and industry

standards to ensure reliable operation over an extended

temperature range. This includes, but is not limited to, Highly

Accelerated Stress Test (HAST) or biased 85/85, temperature

cycle, autoclave or unbiased HAST, electromigration, bond

intermetallic life, and mold compound life. Such qualification

testing should not be viewed as justifying use of this component

beyond specified performance and environmental limits.

Split-Supply Operation

Includes Negative Rail

850

and TLC27L2/L4

description

The TLC2252 and TLC2254 are dual and

quadruple operational amplifiers from Texas

Instruments. Both devices exhibit rail-to-rail

output performance for increased dynamic range

in single- or split-supply applications. The

TLC225x family consumes only 35

µA of supply

current per channel. This micropower operation

makes them good choices for battery-powered

applications. The noise performance has been

dramatically improved over previous generations

of CMOS amplifiers. Looking at Figure 1, the

TLC225x has a noise level of 19 nV/

√Hz at 1kHz;

four times lower than competitive micropower

solutions.

The TLC225x amplifiers, exhibiting high input

impedance and low noise, are excellent for

small-signal conditioning for high-impedance

sources, such as piezoelectric transducers.

Because of the micropower dissipation levels,

these devices work well in hand-held monitoring

and remote-sensing applications. In addition, the

rail-to-rail output feature with single or split

supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For

precision applications, the TLC225xA family is available and has a maximum input offset voltage of 850

µV. This

family is fully characterized at 5 V and

±5 V.

Copyright

 2003 Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Advanced LinCMOS is a trademark of Texas Instruments.

Figure 1

f − Frequency − Hz

EQUIVALENT INPUT NOISE VOLTAGE

vs

FREQUENCY

40

20

10

0

60

30

50

101

10 2

10 3

10 4

VDD = 5 V

RS = 20 Ω

TA = 25°C