Os motores de busca de Datasheet de Componentes eletrônicos |
|
STP6NK50Z Folha de dados(PDF) 6 Page - Texas Instruments |
|
STP6NK50Z Folha de dados(HTML) 6 Page - Texas Instruments |
6 / 17 page 5 Test Setup 5.1 Test Equipment 5.1.1 Voltage Source: 5.1.2 Multimeters 5.1.3 Output Load 5.1.4 Oscilloscope 5.1.5 Signal Generator 5.1.6 Fan 5.1.7 Recommended Wire Gauge Test Setup www.ti.com WARNING High voltages, that may cause injury, exist on this evaluation module (EVM). Please ensure all safety procedures are followed when working on this EVM. Never leave a powered EVM unattended. The use of isolated test equipment is highly recommended. See Figure 3 for recommended test set up. • Source 1: Isolated AC voltage source or VARIAC, capable of 90 VRMS to 264 VRMS at 150 W. • Source 2: A 3.3-V DC source capable of 100 mA. Three digital multimeters are recommend, one for current measurement, A1, and two for voltage measurements, V1 and V2. It is recommended that actual high brightness LED’s (HB-LED’s) are used for the load. They should be rated at 0.9 A. The HB-LED’s should be connected in series. Their voltage drop should be between 55 VDC and 110 VDC. Alternatively a constant voltage electronic load could be used. If using a constant voltage electronic load a 1000- µF/250 VDC capacitor is required at the input to the electronic load. The 1000 µF capacitor should not be used if using HB-LED’s as the load. A digital or analog oscilloscope with current probe is required to view the AC current in the PFC inductor or buck inductor. A signal generator that can produce a square wave pulse train at between 200 Hz and 1 kHz is required to do external PWM dimming. Forced air cooling is not required A minimum of 18 AWG wire is recommended. Also the wire connections between the AC source and the EVM, and the EVM and load should be less than two feet long. The AC input connector accepts a standard IEC320-C13 connector with ground pin. A 0.9-A Constant Current Supply with PFC for 100-W LED Lighting Applications 6 SLUU355A – March 2009 – Revised June 2009 Submit Documentation Feedback |
Nº de peça semelhante - STP6NK50Z |
|
Descrição semelhante - STP6NK50Z |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |