Os motores de busca de Datasheet de Componentes eletrônicos |
|
AD592BN Folha de dados(PDF) 1 Page - Analog Devices |
|
AD592BN Folha de dados(HTML) 1 Page - Analog Devices |
1 / 8 page CONNECTION DIAGRAM PIN 3 PIN 2 PIN 1 (–) (NC) (+) PIN 2 CAN BE EITHER ATTACHED OR UNCONNECTED BOTTOM VIEW * REV. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. a AD592* One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703 Low Cost, Precision IC Temperature Transducer FEATURES High Precalibrated Accuracy: 0.5 C max @ +25 C Excellent Linearity: 0.15 C max (0 C to +70 C) Wide Operating Temperature Range: –25 C to +105 C Single Supply Operation: +4 V to +30 V Excellent Repeatability and Stability High Level Output: 1 A/K Two Terminal Monolithic IC: Temperature In/ Current Out Minimal Self-Heating Errors PRODUCT DESCRIPTION The AD592 is a two terminal monolithic integrated circuit tem- perature transducer that provides an output current propor- tional to absolute temperature. For a wide range of supply voltages the transducer acts as a high impedance temperature dependent current source of 1 µA/K. Improved design and laser wafer trimming of the IC’s thin film resistors allows the AD592 to achieve absolute accuracy levels and nonlinearity errors previ- ously unattainable at a comparable price. The AD592 can be employed in applications between –25 °C and +105 °C where conventional temperature sensors (i.e., ther- mistor, RTD, thermocouple, diode) are currently being used. The inherent low cost of a monolithic integrated circuit in a plastic package, combined with a low total parts count in any given application, make the AD592 the most cost effective tem- perature transducer currently available. Expensive linearization circuitry, precision voltage references, bridge components, resis- tance measuring circuitry and cold junction compensation are not required with the AD592. Typical application areas include: appliance temperature sens- ing, automotive temperature measurement and control, HVAC (heating/ventilating/air conditioning) system monitoring, indus- trial temperature control, thermocouple cold junction compen- sation, board-level electronics temperature diagnostics, temperature readout options in instrumentation, and tempera- ture correction circuitry for precision electronics. Particularly useful in remote sensing applications, the AD592 is immune to voltage drops and voltage noise over long lines due to its high impedance current output. AD592s can easily be multiplexed; the signal current can be switched by a CMOS multiplexer or the supply voltage can be enabled with a tri-state logic gate. The AD592 is available in three performance grades: the AD592AN, AD592BN and AD592CN. All devices are pack- aged in a plastic TO-92 case rated from –45 °C to +125°C. Per- formance is specified from –25 °C to +105°C. AD592 chips are also available, contact the factory for details. *Protected by Patent No. 4,123,698. PRODUCT HIGHLIGHTS 1. With a single supply (4 V to 30 V) the AD592 offers 0.5 °C temperature measurement accuracy. 2. A wide operating temperature range (–25 °C to +105°C) and highly linear output make the AD592 an ideal sub- stitute for older, more limited sensor technologies (i.e., thermistors, RTDs, diodes, thermocouples). 3. The AD592 is electrically rugged; supply irregularities and variations or reverse voltages up to 20 V will not damage the device. 4. Because the AD592 is a temperature dependent current source, it is immune to voltage noise pickup and IR drops in the signal leads when used remotely. 5. The high output impedance of the AD592 provides greater than 0.5 °C/V rejection of supply voltage drift and ripple. 6. Laser wafer trimming and temperature testing insures that AD592 units are easily interchangeable. 7. Initial system accuracy will not degrade significantly over time. The AD592 has proven long term performance and repeatability advantages inherent in integrated cir- cuit design and construction. 378 343 273 248 1µA/oK –45 –25 0 +70 +105 +125 TEMPERATURE – oC |
Nº de peça semelhante - AD592BN |
|
Descrição semelhante - AD592BN |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |