SLA6870MZ-DS

Description

The SLA6870MZ inverter power module (IPM) series provides

a robust, highly-integrated solution for optimally controlling

3-phase motor power inverter systems and variable speed

control systems used in energy-conserving designs to drive

motors of residential and commercial appliances. These ICs

take 230 VAC input voltage, and up to 3 A (continuous) output

current. They can withstand voltages of up to 500 V (MOSFET

breakdown voltage).

The SLA6870MZ power package includes an IC with all of

the necessary power elements (six MOSFETs), pre-driver ICs

(two), and bootstrap diodes (three), needed to configure the

main circuit of an inverter. This enables the main circuit of

the inverter to be configured with fewer external components

than traditional designs.

Applications include residential white goods (home

applications) and commercial appliance motor control:

• Air conditioner fan

• Small ventilation fan

• Dishwasher pump

Features and Benefits

▪ Built-in pre-drive IC

▪ MOSFET power element

▪ Alleviate noise generation by adjusting an internal resistor

▪ CMOS compatible input (5 V)

▪ High-side gate driver using bootstrap circuit or floating

power supply

▪ Built-in protection circuit for controlling power supply

voltage drop (UVLO on VCC)

▪ Overcurrent protection (OCP), overcurrent limiting (OCL),

and thermal shutdown (TSD)

▪ Output of fault signal during operation of protection circuit

▪ Output current 3 A

▪ Small SIP (SLA 24-pin)

High Voltage 3-Phase Motor Drivers

Figure 1. Driver block diagram

Functional Block Diagram

Low-Side

Driver

UVLO

UVLO

UVLO

UVLO

Input

Logic

Input Logic

(OCP Reset )

UVLO

Thermal

Shutdown

SD1

VCC1

VB1

VB2

VB3

VBB

U

V

W1

W2

LS

2

LS

1

SD2

COM2

LIN3

LIN2

LIN1

VCC 2

COM1

HIN3

HIN2

HIN1

High-Side

Level Shift Driver

OCL

OCP and OCL

RC

OCP

Packages: Power SIP

Not to scale

A. ¯S¯¯¯D¯¯1¯ and ¯S¯¯¯D¯¯2¯ terminals are used for both input and output.

B. ¯S¯¯¯D¯¯1¯, ¯S¯¯¯D¯¯2¯, and ¯O¯¯¯C¯¯L¯terminals are open-collector output. RC terminal is open-drain output.

If the time exceeds the limit, the signal will be output (open-collector output turns on) on the ¯S¯¯¯D¯¯2¯

pin, and protection operation will start up.

SLA6870MZ Series

Leadform

2171

Leadform 2175