An Oplink Company

Pb

Product Description

Features

Absolute Maximum Ratings

The TPP1XGDS0xG is an enhanced small form factor pluggable (SFP+) fiber

optic transceiver with digital diagnostics monitoring functionality (DDM).

Supporting Ethernet and Fiber Channel standards makes it ideally suited for

10Gbps data-com and storage area network applications. DDM functionality

interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 10.4.

The transceiver supports data rates ranging from 11.3Gbps down to 8Gbps.

It provides an excellent solution for transmission at 850nm over up to 300m

2000MHz·km multimode fiber. The sub-watt power consumption and

excellent EMI performance allow system design with high port density. The

product is RoHS compliant. The transceiver is Class I Laser product per U.S.

FDA/CDRH and international IEC-60825 standards.

The TPP1XGDS0xG transceiver connects to standard 20-pad SFP+ connectors

for hot plug capability. This allows the system designer to make configuration

changes or maintenance by simply plugging in different transceivers without

removing the power supply from the host system.The transmitter and receiver

DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable control

input and Loss of Signal (LOS) output interfaces are also provided.

The transceiver has bail-type latch, which offers an easy and convenient way

to release the modules. The latch is compliant with the SFP MSA.

The transceiver operates from a single +3.3V power supply over an operating

case temperature range of -5°C to +70°C (Commercial), or -5°C to +85°C

(Extended) or -40°C to +85°C (Industrial). The housing is made of metal for

EMI immunity.



850nm VCSEL laser



Transmission distance up to 300m on OM3 MM

fiber



Low power consumption



Wide Case Operating Temperature Range



Compliant to SFP+ Electrical MSA SFF-8431



Compliant to SFP+ Mechanical MSA SFF-8432



Digital Diagnostics Monitoring (DDM) through

Serial Interface comply with SFF-8472, Rev. 10.4



RoHS 6/6 compliant



Compliant with product safety standards

TPP1XGDS0xG

Parameter

Symbol

Minimum

Maximum

Units

Storage Temperature

T

ST

- 40

+ 85

°C

“Commercial”

T

OP

- 5

+ 70

°C

“Extended”

- 5

+ 85

“Industrial”

- 40

+ 85

RH

0

85

%

Supply Voltage Range

V

CC

- 0.5

+ 3.6

V

1

Measured on top side of SFP+ module at the front center vent hole of the cage.

2

Non condensing

21737-0983. Rev.05. 2011-02-23

850nm SFP+ Transceiver