DATA SHEET • SMP1345 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200046M • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • May 9, 2012

5

Evaluation Board Description

An Evaluation Board is used to test the performance of the

SMP1345 series PIN diodes. An assembly drawing for the

Evaluation Board is shown in Figure 6. A typical application circuit

diagram for a DPDT diversity switch using the SMP1345-518 is

provided in Figure 7.

Package and Handling Information

Package dimensions are shown in Figures 8 to 16 (even

numbers), and tape and reel dimensions are provided in Figures 9

to 17 (odd numbers).

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1345 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260

°C. It can be used for lead or lead-free soldering.

For additional information, refer to the Skyworks Application Note,

Solder Reflow Information, document number 200164.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

Figure 6. SMP1345 Series PIN Diode Evaluation Board Assembly Diagram