AD7625

Data Sheet

Rev. A | Page 8 of 24

Pin No.

Mnemonic

Type1

Description

25, 26, 28

CAP2

AO

Connect all three CAP2 pins together and decouple them with the shortest trace possible to a single

10 μF, low ESR, low ESL capacitor. The other side of the capacitor must be placed close to Pin 27 (GND).

27

GND

P

Ground. Return path for the 10 μF capacitor connected to Pin 25, Pin 26, and Pin 28.

29, 30, 32

REF

AI/O

Buffered Reference Voltage. When using the internal reference or the 1.2 V external reference (REFIN

input), the 4.096 V system reference is produced at this pin. When using an external reference, such

as the ADR434 or the ADR444, the internal reference buffer must be disabled. In either case, connect

all three REF pins together and decouple them with the shortest trace possible to a single 10 μF, low

ESR, low ESL capacitor. The other side of the capacitor must be placed close to Pin 31 (GND).

31

GND

P

Ground. Return path for the 10 μF capacitor connected to Pin 29, Pin 30, and Pin 32.

EP

Exposed Pad

The exposed pad is located on the underside of the package. Connect the exposed pad to the

ground plane of the PCB using multiple vias. See the Exposed Paddle section for more information.