 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
TC62D723FTAG Folha de dados(PDF) 9 Page - Marktech Corporate |
|
||||||||||||||||||||||||||||||
TC62D723FTAG Folha de dados(HTML) 9 Page - Marktech Corporate |
|
|
9 / 44 page  TC62D723FTAG 2012-03-19 9 8-2-1) S1 command (The PWM data is transmitted to the PWM data register 2 or 3.) Operation) In the number of SCK pulses at TRANS="H" is 2 or3, the following operation is executed. 1. The PWM data in the PWM data register 1 is transmitted to the PWM data register 2 or 3. 2. The automatic output open/short detection result data is transmitted to the 16-bit shift register. Note1 When internal PWM count is 1 to 21, the output open/short detection automatic operation is done. 3. The PWM output start. ● In the case of the one-shot PWM output mode Note2 In the input of this command, the PWM output is turned on once. When restarting by same PWM data, please input this command again. ● In the case of the repeat PWM output mode Note2 In the input of this command, PWM output is output repeatedly. In order to stop a PWM output, the input of a reset command is required. Setting of PWM output mode is set by the S6 command. Note) About the output operation when this command is input while PWM output. 1. When the PWM counter is the synchronous mode. Note3 After the present PWM output has ended, PWM output is started by new PWM data. 2. When the PWM counter is the asynchronous mode. Note3 The present PWM output is canceled and a PWM output is immediately started by new PWM data. Setting of PWM output synchronization is set by the S6 command. Basic input pattern of S1 command) The first SCK (signal X) after this command is used for transmission of the output open/short detection result data. The input from SIN is not received. Note1 When internal PWM count is 1 to 21, the output open/short detection automatic operation is done. Please do not input the first SCK (signal X) after S1 command during detection. Note1 Note1: This operation is performed when the output open/short detection function is “Active” setting. The output open/short detection functions are set by S6 command. Default setting is “Not Active”. Note2: PWM output system is set by the S6 command. Default setting is “Repeat PWM output mode”. Note3: PWM output synchronization PWM resolution is set by the S6 command. Default setting is “Synchronous mode”. |
Nº de peça semelhante - TC62D723FTAG |
|
Descrição semelhante - TC62D723FTAG |
|
|
Ligação URL |
| Privacy Policy |
| ALLDATASHEETPT.COM |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
