Os motores de busca de Datasheet de Componentes eletrônicos |
|
ISL23318UFUZ Folha de dados(PDF) 8 Page - Intersil Corporation |
|
ISL23318UFUZ Folha de dados(HTML) 8 Page - Intersil Corporation |
8 / 19 page ISL23318 8 FN7887.0 July 26, 2011 DCP Macro Model tF SDA and SCL Fall Time From 70% to 30% of VLOGIC 20 + 0.1 x Cb 250 ns Cb Capacitive Loading of SDA or SCL Total on-chip and off-chip 10 400 pF tSU:A A1, A0 Set-up Time Before START condition 600 ns tHD:A A1, A0 Hold Time After STOP condition 600 ns NOTES: 8. Typical values are for TA = +25°C and 3.3V supply voltages. 9. LSB = [V(RW)127 – V(RW)0]/127. V(RW)127 and V(RW)0 are V(RW) for the DCP register set to 7F hex and 00 hex respectively. LSB is the incremental voltage when changing from one tap to an adjacent tap. 10. ZS error = V(RW)0/LSB. 11. FS error = [V(RW)127 – VCC]/LSB. 12. DNL = [V(RW)i – V(RW)i-1]/LSB-1, for i = 1 to 127. i is the DCP register setting. 13. INL = [V(RW)i – i • LSB – V(RW)0]/LSB for i = 1 to 127. 14. For i = 16 to 127 decimal, T = -40°C to +125°C. Max( ) is the maximum value of the wiper voltage and Min( ) is the minimum value of the wiper voltage over the temperature range. 15. MI = |RW127 – RW0|/127. MI is a minimum increment. RW127 and RW0 are the measured resistances for the DCP register set to 7F hex and 00 hex respectively. 16. Roffset = RW0/MI, when measuring between RW and RL. Roffset = RW127/MI, when measuring between RW and RH. 17. RDNL = (RWi – RWi-1)/MI -1, for i = 8 to 127. 18. RINL = [RWi – (MI • i) – RW0]/MI, for i = 8 to 127. 19. For i = 8 to 127, T = -40°C to +125°C. Max( ) is the maximum value of the resistance and Min( ) is the minimum value of the resistance over the temperature range. 20. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design. 21. It is preferable to ramp up both the VLOGIC and the VCC supplies at the same time. If this is not possible, it is recommended to ramp-up the VLOGIC first followed by the VCC. Serial Interface Specification For SCL, SDA, A0, A1 unless otherwise noted. (Continued) SYMBOL PARAMETER TEST CONDITIONS MIN (Note 20) TYP (Note 8) MAX (Note 20) UNITS TCV Max V RW ()i () Min V RW ()i () – VRWi +25°C () () ------------------------------------------------------------------------------ 106 +165°C --------------------- × = TCR Max Ri () Min Ri () – [] Ri +25°C () ------------------------------------------------------- 10 6 +165°C --------------------- × = 32pF RH RTOTAL CH 32pF CW CL 32pF RW RL |
Nº de peça semelhante - ISL23318UFUZ |
|
Descrição semelhante - ISL23318UFUZ |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |