Os motores de busca de Datasheet de Componentes eletrônicos |
|
HCPL-2611 Folha de dados(PDF) 5 Page - Agilent(Hewlett-Packard) |
|
HCPL-2611 Folha de dados(HTML) 5 Page - Agilent(Hewlett-Packard) |
5 / 10 page 5 Switching Specifications Over recommended temperature (TA = -40°C to 85°C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. Device Parameter Symbol HCPL- Min. Typ.* Max. Unit Test Conditions Fig. Note Propagation tPLH 20 48 75 ns TA = 25°C 6, 7 5 Delay Time to High 100 8 Output Level Propagation tPHL 25 50 75 TA = 25°C 6, 7 6 Delay Time to Low 100 RL = 350 Ω 8 Output Level Propagation tPSK 40 10, Delay Skew 11 Pulse Width |tPHL - tPLH| 3.5 35 CL = 15 pF 9 10 Distortion Output Rise trise 24 Time 10 (10%-90%) Output Fall tfall 10 Time 10 (10%-90%) Common |CMH| M600 10,000 V/ µsV CM = 10 V VO(min) = 2 V 11 7, 9 M601 5,000 10,000 VCM = 50 V M611 10,000 15,000 VCM = 1000 V Common |CMH| M600 10,000 VCM = 10 V VO(max) = 0.8 V 11 8, 9 M601 5,000 10,000 VCM = 50 V M611 10,000 15,000 VCM = 1000 V *All typicals at TA = 25°C, VCC = 5 V. Notes: 1. Bypassing of the power supply line is required with a 0.1 µF ceramic disc capacitor adjacent to each optocoupler. The total lead length between both ends of the capacitor and the isolator pins should not exceed 10 mm. 2. Peaking circuits may produce transient input currents up to 50 mA, 50 ns maximum pulse width, provided average current does not exceed 20 mA. 3. Device considered a two terminal device: pins 1 and 3 shorted together, and pins 4, 5 and 6 shorted together. 4. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 3000 V RMS for 1 second (Leakage detection current limit, II-O ≤ 5 µA). 5. The tPLH propagation delay is measured from 3.75 mA point on the falling edge of the input pulse to the 1.5 V point on the rising edge of the output pulse. 6. The tPHL propagation delay is measured from 3.75 mA point on the rising edge of the input pulse to the 1.5 V point on the falling edge of the output pulse. 7. CMH is the maximum tolerable rate of rise of the common mode voltage to assure that the output will remain in a high logic state (i.e., VOUT > 2.0 V). 8. CML is the maximum tolerable rate of fall of the common mode voltage to assure that the output will remain in a low logic state (i.e., VOUT > 0.8 V). 9. For sinusoidal voltages, (|dVCM|/dt)max = πfCMVCM(p-p). 10. See application section; “Propagation Delay, Pulse-Width Distortion and Propagation Delay Skew” for more information. 11. tPSK is equal to the worst case difference in tPHL and/or tPLH that will be seen between units at any given temperature within the worst case operating condition range. Mode Transient Immunity at High Output Level Mode Transient Immunity at Low Output Level RL = 350 Ω IF = 7.5 mA TA = 25°C RL = 350 Ω IF = 0 mA TA = 25°C |
Nº de peça semelhante - HCPL-2611 |
|
Descrição semelhante - HCPL-2611 |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |