LF412-N

SNOSBH7F – APRIL 1999 – REVISED SEPTEMBER 2014

www.ti.com

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1) (2)

LF412A

LF412

UNIT

MIN

MAX

MIN

MAX

Supply Voltage

–22

22

–18

18

V

Differential Input Voltage

–38

38

–30

30

V

Continuous

Continuous

TO Package

PDIP Package

670

mW

150

115

°C

Operating Temp. Range

Lead Temp. (Soldering, 10 sec.)

260

260

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

Refer to RETS412X for LF412MH and LF412MJ military specifications.

(3)

Unless otherwise specified the absolute maximum negative input voltage is equal to the negative power supply voltage.

(4)

Any of the amplifier outputs can be shorted to ground indefintely, however, more than one should not be simultaneously shorted as the

maximum junction temperature will be exceeded.

(5)

Max. Power Dissipation is defined by the package characteristics. Operating the part near the Max. Power Dissipation may cause the

part to operate outside guaranteed limits.

(6)

For operating at elevated temperature, these devices must be derated based on a thermal resistance of

(7)

These devices are available in both the commercial temperature range 0°C

indicates the commercial temperature range and an “M” indicates the military temperature range. The military temperature range is

6.2 Handling Ratings

TO and PDIP Package

UNIT

MIN

MAX

Storage temperature range

−65

150

°C

Human body model (HBM),

-1700

Electrostatic discharge

V

Charged device model (CDM),

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

Human body model, 1.5 k

Ω in series with 100 pF.

(3)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Supply Voltage LF412A

±20

V

Supply Voltage LF412

±15

V

4

Submit Documentation Feedback

Copyright © 1999–2014, Texas Instruments Incorporated

Product Folder Links: LF412-N