DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045L • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 20, 2015

3

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1307 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260

C. It can be used for lead or lead-free soldering.

For additional information, refer to the Skyworks Application Note,

Solder Reflow Information, document number 200164.

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

Table 2. SMP1307 Series Absolute Maximum Ratings (Note 1)

Parameter

Symbol

Minimum

Maximum

Units

Reverse voltage

200

V

Power dissipation @ 25

°C lead temperature

250

mW

Storage temperature

–65

+150

C

Operating temperature

–65

+150

C

Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.

Table 3. SMP1307 Series Electrical Specifications (Note 1)

Parameter

Symbol

Test Condition

Min

Typical

Max

Units

Reverse current

10

μA

Capacitance (Note 2)

f = 1 MHz, V = 30 V

0.3

pF

Resistance

f = 100 MHz

I = 1 mA

I = 10 mA

I = 100 mA

75

100

15

3

Ω

Ω

Ω

Forward voltage

0.85

V

Carrier lifetime

TI

1.5

μs

I region width

175

μm

Note 1: Performance is guaranteed only under the conditions listed in this table.

Note 2: The SMP1307-027 maximum capacitance is 0.45 pF.