AD7918BRU-REEL7 datasheet(1/24 Pages) AD

Nome de Peças	AD7918BRU-REEL7

Descrição Electrónicos	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP

Download	24 Pages

Scroll/Zoom	100%

Fabricante Electrônico	AD [Analog Devices]

Página de início	http://www.analog.com

Logo

1 / 24 page

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties that

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective companies.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

www.analog.com

Fax: 781/326-8703

REV. A

AD7908/AD7918/AD7928

8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs

with Sequencer in 20-Lead TSSOP

FUNCTIONAL BLOCK DIAGRAM

•

VIN7

T/H

I/P

MUX

SEQUENCER

CONTROL LOGIC

8-/10-/12-BIT

SUCCESSIVE

APPROXIMATION

ADC

GND

SCLK

DOUT

DIN

CS

VDRIVE

AVDD

AD7908/AD7918/AD7928

REFIN

VIN0

FEATURES

Fast Throughput Rate: 1 MSPS

Specified for AVDD of 2.7 V to 5.25 V

Low Power:

6.0 mW Max at 1 MSPS with 3 V Supply

13.5 mW Max at 1 MSPS with 5 V Supply

8 (Single-Ended) Inputs with Sequencer

Wide Input Bandwidth:

AD7928, 70 dB Min SINAD at 50 kHz Input Frequency

Flexible Power/Serial Clock Speed Management

No Pipeline Delays

High Speed Serial Interface SPI®/QSPI™/

MICROWIRE™/DSP Compatible

Shutdown Mode: 0.5 A Max

20-Lead TSSOP Package

GENERAL DESCRIPTION

The AD7908/AD7918/AD7928 are, respectively, 8-bit, 10-bit,

and 12-bit, high speed, low power, 8-channel, successive

approximation ADCs. The parts operate from a single 2.7 V

to 5.25 V power supply and feature throughput rates up to

1MSPS. The parts contain a low noise, wide bandwidth track-

and-hold amplifier that can handle input frequencies in excess

of 8 MHz.

The conversion process and data acquisition are controlled using

CS and the serial clock signal, allowing the device to easily inter-

face with microprocessors or DSPs. The input signal is sampled

on the falling edge of

CS and conversion is also initiated at this

point. There are no pipeline delays associated with the part.

The AD7908/AD7918/AD7928 use advanced design techniques to

achieve very low power dissipation at maximum throughput rates.

At maximum throughput rates, the AD7908/AD7918/AD7928

consume 2 mA maximum with 3 V supplies; with 5 V supplies, the

current consumption is 2.7 mA maximum.

Through the configuration of the Control Register, the analog

input range for the part can be selected as 0 V to REFIN or 0 V to

2

REFIN, with either straight binary or twos complement out-

put coding. The AD7908/AD7918/AD7928 each feature eight

single-ended analog inputs with a channel sequencer to allow a

preprogrammed selection of channels to be converted sequentially.

The conversion time for the AD7908/AD7918/AD7928 is deter-

mined by the SCLK frequency, which is also used as the master

clock to control the conversion.

PRODUCT HIGHLIGHTS

1. High Throughput with Low Power Consumption.

The AD7908/AD7918/AD7928 offer up to 1 MSPS throughput

rates. At the maximum throughput rate with 3 V supplies, the

AD7908/AD7918/AD7928 dissipate just 6 mW of power

maximum.

2. Eight Single-Ended Inputs with a Channel Sequencer.

A sequence of channels can be selected, through which the

ADC will cycle and convert on.

3. Single-Supply Operation with VDRIVE Function.

The AD7908/AD7918/AD7928 operate from a single 2.7 V to

5.25 V supply. The VDRIVE function allows the serial interface

to connect directly to either 3 V or 5 V processor systems

independent of AVDD.

4. Flexible Power/Serial Clock Speed Management.

The conversion rate is determined by the serial clock, allowing

the conversion time to be reduced through the serial clock

speed increase. The parts also feature various shutdown

modes to maximize power efficiency at lower throughput rates.

Current consumption is 0.5 µA max when in full shutdown.

5. No Pipeline Delay.

The parts feature a standard successive approximation ADC

with accurate control of the sampling instant via a

CS input

and once off conversion control.

Nº de peça semelhante - AD7918BRU-REEL7

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
Analog Devices	AD7918BRU-REEL7	456Kb / 32P	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs REV. D

More results

Descrição semelhante - AD7918BRU-REEL7

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
Analog Devices	AD7908	557Kb / 28P	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP Rev. E
	AD7928	557Kb / 28P	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP Rev. E
	AD7918	557Kb / 28P	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP Rev. E
	AD7928BRUZ	456Kb / 32P	8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP REV. D
	AD7914	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7924	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7924BRUZ	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7904	525Kb / 32P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. C
	AD7904	411Kb / 24P	4-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 16-Lead TSSOP REV. 0
	AD7927BRUZ	485Kb / 28P	8-Channel, 200 kSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP REV. C

More results

AD7918BRU-REEL7 Folha de dados(PDF) 1 Page - Analog Devices

AD7918BRU-REEL7 Folha de dados(HTML) 1 Page - Analog Devices

Nº de peça semelhante - AD7918BRU-REEL7

Descrição semelhante - AD7918BRU-REEL7

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Folha de dados Download

Ligação URL