07

Keysight M9330A Arbitrary Waveform Generator

Sample clock

Internal

Fixed 1.25 GS/s

Internal clock output

+3 dBm nominal

External clock input

Tunable 100 MS/s to 1.25 GS/s

External clock input drive level

+5 to –15 dBm typical

Phase noise characteristics

1 kHz: –95 dBc/Hz

10 kHz: –115 dBc/Hz

100 kHz: –138 dBc/Hz

1 MHz: –150 dBc/Hz

Noise floor

–150 dBc/Hz

Accuracy

Same as 10 MHz timebase input

Frequency reference

Input drive level

+2 to +12 dBm into 50 Ω (+2 dBm nominal)

Waveform length

8 MS per channel (16 MS with option 016)

Minimum waveform length

128 samples

Waveform granularity

8 samples

Segment

1 to 32 k unique segments can be defined consisting of waveform start and stop address, repetitions, and marker enable flags.

Segment loops

A total of 1 million (220) loops can be defined

for each segment. Loops can be configured to

advance in one of three modes:

Single

– The segment loop plays once and waits at the end of the loop for a trigger.

Continuous

– Segment loop is repeated continuously until a trigger is received.

Auto

– Automatically advances to the next segment after completing the specified number of loop

repetitions.

Repeat

– The waveform loop repeats until the number of wave form loop repetitions is met.

Sequences

Up to 32 k total unique waveform sequences can be defined. A sequence is a contiguous series of waveform segments.

Advanced sequencing

Enables users to build and playback scenarios, which are comprised of one or more sequences.

Scenarios

1 to 16 k pointers can be assigned to play pre-defined sequences. Sequence play begins with the first sequence entry and continues uninterrupted until

the last entry is played. The table repeats until stopped.