type apply over the full operating junction temperature range (−25˚C

≤ T

J

≤ +125˚C). Unless otherwise noted, specifications

apply to the LM3671 Typical Application Circuit (Figure. 1) with V

Note 8: Refer to datasheet curves for closed loop data and its variation with regards to supply voltage and temperature. Electrical Characteristic table reflects open

loop data (FB=0V and current drawn from SW pin ramped up until cycle by cycle current limit is activated). Closed loop current limit is the peak inductor current

measured in the application circuit by increasing output current until output voltage drops by 10%.

Note 9: Min and Max limits are guaranteed by design, test or statistical analysis. Typical numbers are not guaranteed, but do represent the most likely norm.

to datasheet curves.

Note 11: Input voltage range for all voltage options is 2.8V to 5.5V. The voltage range recommended (Fixed Voltage parts) for ideal applications performance with

500mA or higher output current is given below.

Dissipation Rating Table

θ

JA

T

A

≤ 25˚C

Power Rating

T

Power Rating

T

Power Rating

250˚C/W

400mW

260mW

160mW

www.national.com

5