Os motores de busca de Datasheet de Componentes eletrônicos |
|
LM2991WG-QML Folha de dados(PDF) 1 Page - National Semiconductor (TI) |
|
|
LM2991WG-QML Folha de dados(HTML) 1 Page - National Semiconductor (TI) |
1 / 11 page LM2991 Negative Low Dropout Adjustable Regulator General Description The LM2991 is a low dropout adjustable negative regulator with a output voltage range between −3V to −24V. The LM2991 provides up to 1A of load current and features a On /Off pin for remote shutdown capability. The LM2991 uses new circuit design techniques to provide a low dropout voltage, low quiescent current and low tempera- ture coefficient precision reference. The dropout voltage at 1A load current is typically 0.6V and a guaranteed worst-case maximum of 1V over the entire operating tem- perature range. The quiescent current is typically 1 mA with a 1A load current and an input-output voltage differential greater than 3V. A unique circuit design of the internal bias supply limits the quiescent current to only 9 mA (typical) when the regulator is in the dropout mode (V OUT −VIN ≤ 3V). The LM2991 is short-circuit proof, and thermal shutdown in- cludes hysteresis to enhance the reliability of the device when inadvertently overloaded for extended periods. The LM2991 is available in 5-lead TO-220 and TO-263 packages and is rated for operation over the automotive temperature range of −40˚C to +125˚C. Mil-Aero versions are also avail- able. Features n Output voltage adjustable from −3V to −24V, typically −2V to −25V n Output current in excess of 1A n Dropout voltage typically 0.6V at 1A load n Low quiescent current n Internal short circuit current limit n Internal thermal shutdown with hysteresis n TTL, CMOS compatible ON/OFF switch n Functional complement to the LM2941 series Applications n Post switcher regulator n Local, on-card, regulation n Battery operated equipment Typical Application DS011260-1 VOUT = VREF (1 + R2/R1) *Required if the regulator is located further than 6 inches from the power supply filter capacitors. A 1 µF solid tantalum or a 10 µF aluminum electrolytic capacitor is recommended. **Required for stability. Must be at least a 10 µF aluminum electrolytic or a 1 µF solid tantalum to maintain stability. May be increased without bound to maintain regulation during transients. Locate the capacitor as close as possible to the regulator. The equivalent series resistance (ESR) is critical, and should be less than 10 Ω over the same operating temperature range as the regulator. May 1999 © 1999 National Semiconductor Corporation DS011260 www.national.com |
Nº de peça semelhante - LM2991WG-QML |
|
Descrição semelhante - LM2991WG-QML |
|
|
Ligação URL |
Privacy Policy |
ALLDATASHEETPT.COM |
ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |