1 of 2

© 2014 TE Connectivity family of companies

All Rights Reserved

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

Instruction Sheet

408-8676

27 OCT 14

Rev G

TE

CONNECTIVITY

PART NUMBER

PREVIOUS

PART

NUMBER

WRENCH DESCRIPTION

WRENCH SIZE

PRESET TORQUE

mm

[inches]

1055276-1

2098-0351-54

Production Torque Wrench

6.4

1/4

14 in-lbs ±2 lb

1055419-1

2098-5065-54

For SMA (OSM) Type Connectors

7.9

5/16

8 in.-lbs +1.5/-.5 lb

1055480-1

2098-5304-54

For OSSM Type Connectors

6.4

1/4

5 in.-lbs ±.5 lb

1055512-1

2098-5619-54

For SMA (OSM) Hermetic Type Connectors

7.1

9/32

30 in.-lbs ±2 lb

1055546-1

2098-5830-54

Production Torque Wrench Kit

6.4 and 8.0

1/4 and 5/16

8 in.-lbs +1.5/-.5 lb

1055790-1

2598-5026-54

For SC/N Type Connectors (Hex Nut Design)

20.6

13/16

14 in.-lbs ±2 lb

1055791-1

2598-5027-54

For TNC Type Connectors (Hex Nut Design)

15.9

5/8

14 in.-lbs ±2 lb

1055826-1

2598-5160-54

Production Torque Wrench

4.0

5/32

8 in.-lbs +1.5/-.5 lb

1055868-1

2598-5298-54

For TNC Type Connectors (Hex Nut Design)

14.3

9/16

14 in.-lbs±2 lb

1061789-1

7098-5031-54

For 7mm Type Connectors

19.1

3/4

14 in.-lbs ±2 lb

1490262-1

2598-5383-50

Production Torque Wrench

7.9

5/16

15 in.-lbs ±2 lb

Figure 1

1. INTRODUCTION

These production torque wrenches are used to properly install or disassemble the connectors listed in Figure 1.

Figure 1 also contains the TE part numbers for the wrenches, the previous part numbers for the wrenches,

wrench size, and the preset torque for each wrench.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets], unless otherwise noted.

Reason for revision is provided in Section 5, REVISION SUMMARY.

2. DESCRIPTION

Each production torque wrench contains a protective cover, a torque wrench, and an interchangeable head.

Refer to Figure 2 for the appropriate replacement wrench head part numbers.

The wrenches are designed to be used in the clockwise or counterclockwise direction.

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low

volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Production Torque Wrenches

Open-End

Wrench Head

Torque Wrench

Protective Cover