Os motores de busca de Datasheet de Componentes eletrônicos
Selected language  

  Portuguese  ▼

nome da peças
         descrição  


1--1490413--6 Datasheet(Folha de dados) 2 Page - TE Connectivity Ltd

Nome de Peças. 1--1490413--6
descrição  Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Download  5 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Fbricantes  TEC [TE Connectivity Ltd]
Página de início  http://www.te.com/usa-en/home.html
Logo 

   
 2 page
background image
408- 10110
Rev D
2
of 5
Figure 2
Upper Die
Release Button
Nest
Indenter
Lower Die
Release Button
Ram
(Advanced)
Stationary Die
Release Button
Moving Die
Release Button
Ram
(Advanced)
Nest
Indenter
Hydraulic Crimping Head
Hydraulic Hand Crimping Tool
“C” Head
Yoke
Yoke
“C” Head
To avoid personal injury, make sure to exercise
extreme caution when using the head or tool.
Avoid depressing the footswitch or trigger control
when installing or removing the dies.
3.1. Die Installation
1. Depress the upper die release button (head) or
stationary die release button (tool) located on the
“C”--head. See Figure 2.
2. Slide the nest into place in the “C”--head. See
Figure 2.
3. Release the button, and rock the nest back and
forth until the nest snaps into position.
4. Activate the head or tool according to the
instructions included with the head or tool until the
lower die release button (head) or moving die
release button (tool) located in the ram is exposed.
Depress the button.
5. Slide the indenter into position in the ram. See
Figure 2.
6. Release the button, and rock the indenter back
and forth until the indenter snaps into position.
7. Return ram to the down position.
3.2. Die Removal
1. Depress the upper die release button (head) or
stationary die release button (tool) located on the
“C”--head, and slide the nest out. See Figure 2.
2. Activate the head or tool according to the
instructions included with the head or tool until the
lower die release button (head) or stationary die
release button (tool) located in the ram is exposed.
3. Depress the button, and slide the indenter out of
the ram.
4. CRIMPING PROCEDURE
1. Ensure that the wire range or size stamped on
the terminal or splice corresponds with the wire
size being used and the wire range or size marked
on the nest and indenter.
2. Strip the wire to the dimension given in Figure 3.
DO NOT nick or cut the wire strands.
Insulation
Strip Length
(Refer to Table)
Note:
Not to Scale
Conductors
NOMINAL WIRE SIZE (AWG)
STRIP LENGTH
8
11.43 [.450]
6
12.06 [.475]
4
13.34 [.525]
2
14.60 [.575]
1
15.87 [.625]
1/0
17 46 [ 688]
2/0
17.46 [.688]
3/0
19.05 [.750]
4/0
20.64 [.812]
Figure 3
DANGER




Html Pages

1  2  3  4  5 


Datasheet Download




Ligação URL

ALLDATASHEET é util para você?  [ DONATE ]  

Sobre Alldatasheet   |  Publicidade   |   Contato conosco    |   Política de Privacidade   |   Favoritos   |  Troca de Link    |  Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl