Specification for a Bandpass LC Filter

MtronPTI P/N: LF9406

Rev. A 06/26/12

Page 1 of 2

The information contained herein is proprietary to MtronPTI and is submitted in confidence.

This information may not be copied or divulged without the express written permission of MtronPTI

I. General & Electrical Requirements

1.

2.

Passband @ 1dBc: 2100MHz minimum (1950MHz to 4050MHz)

3.

4.

Return Loss (Ref to 50Ω, over the 1dBc Passband): ≥ 14dB

5.

Rejection (Minimum)

60dBc: DC to 1500MHz

60dBc: 4500MHz to 18000MHz

6.

Signal Level: +20dBm CW

7.

II. Environmental & Physical Requirements:

1.

Temperature Range

Operating: 0C to +60C

Storage: -65C to +90C

2.

Solderability: Per EIAJ-STD-002

3.

Package (see Figure 1):

Size: 2.05” (L) x 0.400” (W) x 0.400” (H), including Gull Wing formed leads

Seal: Non-Hermetic, solder sealed

Finish: Silver, Sn63Pb37 (or equivalent) tinned terminals

Figure 1 – Suggested Filter Package Outline Drawing