MB95160MA Series

4

DS07–12624–3E

(Continued)

* : For details of option, refer to “

■ MASK OPTION”.

Note : Part number of evaluation product in MB95160MA series is MB95FV100D-103. When using it, the MCU

board (MB2146-303A-E) is required.

Part number

Parameter

MB95168MA

MB95F168MA

MB95F168NA

MB95F168JA

LCD controller

(LCDC)

COM output

: 4 (Max)

SEG output

: 32 (Max)

LCD drive power supply (bias) pin

: 4

32 SEG

× 4 COM : 128 pixels can be displayed.

Duty LCD mode

Operable in LCD standby mode

With blinking function

Built-in division resistance for LCD drive

8/16-bit compound

timer (2 channels)

Each channel of the timer can be used as “8-bit timer

× 2 channels” or “16-bit timer

× 1 channel”.

Built-in timer function, PWC function, PWM function, capture function, and square

wave form output

Count clock : 7 internal clocks and external clock can be selected.

16-bit PPG

(1 channel)

PWM mode or one-shot mode can be selected.

Counter operating clock : Eight selectable clock sources

Support for external trigger start

8/16-bit PPG

(2 channels)

Counter operating clock : Eight selectable clock sources

Watch counter

Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)

Counter value can be set from 0 to 63. (Capable of counting for 1 minute when

selecting clock source 1 second and setting counter value to 60)

Watch prescaler

(1 channel)

4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)

External interrupt

(8 channels)

Interrupt by edge detection (rising, falling, or both edges can be selected.)

Can be used to recover from standby modes.

Flash memory

⎯

Supports automatic programming, Embedded Algorithm

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of write/erase cycles (Minimum) : 10000 times

Data retention time: 20 years

Erase can be performed on each block

Block protection with external programming voltage

Flash Security Feature for protecting the content of the Flash

Standby mode

Sleep, stop, watch, and time-base timer